Includes pin (see pictures) but I cannot verify whether it works and/or is accurate. Some cracking on lid as shown in photos.

Does not look to be working. Wind Vane is missing 2 blades but spins.

A very good lacquered brass aneroid pocket barometer altimeter retailed by Chadburn’s Ltd, Liverpool with fruitwood travel desk stand c. Pocket barometer having 1¾” silvered and die struck dial, the outer bezel operated altitude ring marked “Higher” and “Lower” with a range from 0-6,000ft divided down to 50ft, inner barometric scale calibrated in inches of mercury with a range from 24″ – 31″ divided down to 1/20″. The upper part marked with standard meteorological terms and “Compensated, ” the lower signed by the retailer Chadburn’s, Opticians, Liverpool. Blued steel pointer, bevelled glass, Whiteside-Cook compensation system with rotating back, locking screw. Standard configuration movement driven from a single 1 nickel alloy capsule tensioned on a C spring. The cast iron chassis with maker’s marks J. No 36 to verso. The whole enclosed within a semi barrel form lacquered brass case with turned finishers. Presented in a sliding and folding fruitwood desk or travel case. Condition: The subject of a full service, conservation, and calibration under laboratory conditions. The movement working exceptionally well between 26″ and 31″, drifting at pressures below 26 – this is entirely normal for instruments of this type and age. The barometer dial clean and crisp, some slight ageing. The brass case retaining much original finish, some tarnishing and losses, small scratch to verso. The desk case opening and closing easily, good external colour and well figured timber. The inner blue velvet lining faded with losses. Comments: A handsome instrument, working well and in good crisp overall condition. The timber case is quite unusual and adds both interest and utility. The movement unsigned, but by Negretti & Zambra. This pocket barometer would be a very special and thoughtful gift.

Antique Queen & Co. It’s just under 1 lb. And it’s about 4-1/2 inches tall by almost 3 inches wide, and about 2-1/4 inch thick. There is a tiny screw in the back that adjusts the front and the front can be turned (it’s on a revolving wheel). Goes from sea level to 15,000 feet. I don’t believe it’s working. Makes a nice showpiece nonetheless (for a desk especially).

Altimeter with the original leather case. Made in Hamburg circa 1930 for Caracas, Venezuela distribution. It has some time and use signs and scratches but still has plenty of beauty. The leather case hinge has been detached from its place. The piece has excellent shape but its operating condition is unknown. It might need some maintenance and minimal repairs, proper inner cleaning and adjustment if you want to use it. Really beautiful, original and vintage piece, ideal for a vintage altimeter rarities collector. It might have marks of the time that has passed, some stains, discoloration, ink marks or other signs of its age are considered normal. What you are looking at, is what you receive. We will be happy to answer any questions. If you need a specific picture, we can bring it for your entire satisfaction. The item is for sale «As is». We have taken several pictures of all sides of the piece so that it can be fully appreciated. Please use them to help judge the condition and if you feel it is necessary, please request more pictures and make any inquiries before purchasing. The pictures of this item, are from the actual item you will receive.

Altimeter with the original leather case. Made in Hamburg circa 1930 for Caracas, Venezuela distribution. It has some time and use signs and scratches but still has plenty of beauty. The leather case hinge has been detached from its place. The piece has excellent shape but its operating condition is unknown. It might need some maintenance and minimal repairs, proper inner cleaning and adjustment if you want to use it. Really beautiful, original and vintage piece, ideal for a vintage altimeter rarities collector. It might have marks of the time that has passed, some stains, discoloration, ink marks or other signs of its age are considered normal. What you are looking at, is what you receive. We will be happy to answer any questions. If you need a specific picture, we can bring it for your entire satisfaction. The item is for sale «As is». We have taken several pictures of all sides of the piece so that it can be fully appreciated. Please use them to help judge the condition and if you feel it is necessary, please request more pictures and make any inquiries before purchasing. The pictures of this item, are from the actual item you will receive.

Altimeter with the original leather case. Made in Hamburg circa 1930 for Caracas, Venezuela distribution. It has some time and use signs and scratches but still has plenty of beauty. The leather case hinge has been detached from its place. The piece has excellent shape but its operating condition is unknown. It might need some maintenance and minimal repairs, proper inner cleaning and adjustment if you want to use it. Really beautiful, original and vintage piece, ideal for a vintage altimeter rarities collector. It might have marks of the time that has passed, some stains, discoloration, ink marks or other signs of its age are considered normal. What you are looking at, is what you receive. We will be happy to answer any questions. If you need a specific picture, we can bring it for your entire satisfaction. The item is for sale «As is». We have taken several pictures of all sides of the piece so that it can be fully appreciated. Please use them to help judge the condition and if you feel it is necessary, please request more pictures and make any inquiries before purchasing. The pictures of this item, are from the actual item you will receive.

Made in Hamburg circa 1930 for Caracas, Venezuela distribution. The leather case hinge has been detached from its place. What you are looking at, is what you receive. The item is for sale «As is».